
Paver Calculator
Calculate paved area, cutting allowance and whole pavers from project dimensions and individual paver size.
Free calculators for concrete, tile, brick, drywall, paint, roofing, insulation and electrical planning.
Free calculators for concrete, tile, brick, drywall, paint, roofing, insulation and electrical planning.

Calculate paved area, cutting allowance and whole pavers from project dimensions and individual paver size.

Calculate room area, the number of carpet strips and the linear roll length needed for installation.

Estimate vinyl plank flooring area, fitting waste and whole packs from the room dimensions.

Estimate sand volume and mass for bedding, filling or landscaping from dimensions, depth and bulk density.

Calculate gravel volume and approximate tonnes from area, layer depth, bulk density and delivery allowance.

Calculate net wall length, cutting allowance and whole baseboard pieces after subtracting doorways.

Estimate tile adhesive weight and whole bags from tiled area, product consumption and waste allowance.

Estimate self-leveling compound weight and whole bags from floor area, average depth and label consumption.

Calculate screed area, dry-mix weight and whole bags from floor size, thickness and consumption rate.

Estimate finishing putty weight and whole bags from surface area, coat thickness and label consumption.

Estimate dry plaster weight and whole bags from wall size, layer thickness and product consumption.

Calculate wallpaper drops and whole rolls from wall perimeter, ceiling height, openings and pattern repeat.

Calculate laminate floor area, cutting allowance and the number of whole packs required for a room.

Calculate floor tile, wall tile and full boxes for a bathroom from room size and tiled wall height.

Estimate current and voltage drop for a simple single-phase copper circuit.

Calculate insulation area, material volume and full packs from surface size, thickness and pack coverage.

Estimate sloped roof area and material units from plan dimensions, pitch, coverage and waste.

Estimate wall area, paint litres and primer from room dimensions, openings, coats and coverage.

Calculate net wall area, full drywall sheets and a practical screw allowance for a room.

Estimate masonry units from wall size, openings, unit dimensions, mortar joint and waste.

Estimate tile quantity and full boxes from surface size, tile dimensions and cutting waste.